五軸加工中心PCU50主機顯示二個88包修好，西門子數控系統維修，西門子數控磨床維修，恒稅電氣修西門子工業設備修的好還修的快，我公司庫存各系列西門子配件及維修所需配件，模塊，電容，芯片等核心配件都是原廠，修好不易壞，很多修好用到報廢都有。如果需要維修可以發給我公司處理，另外公司各西門子模擬測試平臺等在線測速儀都齊全，在加上專業的西門子維修團隊，可以確保西門子維修成功率，公司以合理的價格、良好的信譽，已得到同行及西門子用戶的認可。

五軸加工中心PCU50主機顯示二個88包修好故障處理：西門子PCU50-840D系統常見故障：開機黑屏、白屏;啟動不正常；死機無反應；供電不顯示；無法正常進入加工界面；H1、H2 的7段碼顯示“28”“69”“88”等。
西門子PCU5*現象：840D數控系統機床，的PCU50.3重新啟動時，計算機不能正常啟動，上電后數碼管顯示88 ，兩燈同時顯示紅色
西門子PCU5*分析：PCU無法啟動故障，說明內部調用時出現了問題。
故障排除方法：
1.重新啟動試機；
2．檢查外圍接口線路是否有松動或接觸不良；
3.檢查供電單元，正常輸入電壓是+24vdc；
4.打開PCU50.3單元，將PCU 后蓋打開，檢查內存條是否插牢靠，扁平電纜插接是否可靠； 
5.如果仍未檢查出故障，檢查西門子840D 的軟件系統HMI advanced，可以將以前備份好的系統備份重新鏡像到一個新的硬盤上做實驗。
6.后可以判斷PCU50.3的主板損壞，此時需要廠家或專業維修公司進行維修。

西門子數控磨床維修，龍門銑西門子840D系統維修，龍門式加工中心840D系統維修，西門子數控立車840D系統維修，西門子數控臥床840D系統維修，西門子數控車床840D系統維修，重型鏜銑床840D系統維修，重型臥式車床840D系統維修，臥式加工中心840D系統維修，五軸機床西門子系統維修，西門子808D車削開不了機維修，車銑復合西門子系統維修，西門子802D系統插齒機維修，重型臥式車床西門子系統維修，車銑復合機床西門子840D系統維修。五軸加工中心西門子840D系統維修，數控加工中心840D系統維修，龍門鏜銑床西門子840D系統維修，數控五軸聯動加工中心西門子840D系統維修，SINUMERIK 840D數控系統維修